CONFIGURAR TAILSCALE COMO NODO DE SALIDA VPN Y SERVICIOS DE RED
Enable IP forwarding
When enabling IP forwarding, ensure your firewall denies traffic forwarding by default. This is the default setting for standard firewalls like ufw and firewalld. Blocking traffic forwarding by default prevents unintended routing of traffic.
IP forwarding is required to use a Linux device as a subnet router. The process for enabling IP forwarding varies between Linux distributions. However, the following instructions work in most cases.
If your Linux system has a /etc/sysctl.d directory, use:
COPIA Y PEGA ESO EN UNA TERMINAL
echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.d/99-tailscale.conf
echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.d/99-tailscale.conf
sudo sysctl -p /etc/sysctl.d/99-tailscale.conf
Advertise subnet routesAfter you enable IP forwarding, run
tailscale up with the --advertise-routes flag. It accepts a comma-separated list of subnet routes.COPIA Y PEGA ESTO
sudo tailscale up --advertise-routes=192.168.1.0/24
Y CON ESTO YA QUEDA COMO NODO DE SALIDA
sudo tailscale set --advertise-exit-node
sudo tailscale up
https://tailscale.com/kb/1067/update?tab=linux
Comentarios
Publicar un comentario